What out of these two methodes is best?
Quote:
1) Put 1g of cocaine per 60mL water
2) Start adding ammonia while stirring
3) Cocaine base will begin to sink as it precipitates, stir it in well as the impurities will stick to the sides and base will sink
4) After the base settles the water should be clear and adding more ammonia should not cause the water to turn white
5) Once clear and settled mix up to suspend the base and pass through a filter wash with clean water and let dry
|
or:
Quote:
1)Mix about 1 gram of coke and 10 ml of water in a small vial.
2) Slowly add drops of ammonia to the solution. A white milky precipitate will form. Stop adding ammonia when additional drops no longer result in precipitation.
3) Add 5 ml of ethyl ether, close vial, and shake. The precipitate (freebase) will dissolve in the ether.
4) Siphon off the ether with a pipette (ether and water don't mix), and slowly drip it on a plate.
5) Let dry
|
What tek gives best results?