Smoking - Making Meth Pipe without a Torch.

[Foiled]

How would one do so. Swim has Xmas light bulbs and a Bic lighter.Thanks

[tryptamaster]

well in swims xp he lightbulb gotta be a decent size and swim alwyas uses xlear ones no coating inside. take pliers and rip the metal thing off. then kinda break the glass carefully and empty allt he metal and galss bits out
wash out with water and tape over the jagged glass. take a bottle cap and punch a whole in it, place meth in pipe and cover the cap onto tjhe bulb.heat til u see the smoke. lift ur finger off thge bottle cap and inhale
crude but swim knows it wrks.

[Foiled]

Can anyone confirm this? And do you need a air intake hole? And tyvm for your time.

[Dexyfiend]

Yeah, this should work although SWIM wouldnt put his finger over it, smoke it all up, then take his finger off and inhale... he would just stick a wide straw in his mouth and suck up all the smoke when it appeared.

[Foiled]

Thank you Dexy and Typa, appreciate it

[EducatedUser408]

Don't be a tweeker!!!.......Go and get a torch, preferably MAPP gas and some air fresheners and blow them the right way........Or if SWIY can get pyrex tubing, even better........It's not as dangerous as it seems........Just make sure pyrexis not wet or extremely cold when SWIY heats up the glass.........With proper precutions, the wost thing that could happen is that glass will crack..........When that happens, learn from your mistake and try again

[lovelyuy]

just buy a pipe that won't cost swiy much, what swiy need is just a bent stam with a round and a hole to put the crystal.

[Euthanatos93420]

A gas stove works well for this purpose. It gets just a bit hotter than a bic but one must be careful to hold it still. In fact this method works better than a torch because the hole popped is larger and doesnt need to be ground out.