Blunt rolling 101, in detail.

[searcher]

Buy a cigar (Philly blunt, Dutch masters, Swisher Sweets, Optimo, White Owl, Garcia Vega...).
Note: weed must be "pre-broken up".

Take the cigar out of it container. Snap off about 1/2 inch on the "closed end". By doing so, this gets rid of the "cancer piece" (a thicker piece of "fiber" that absorbs the juices if you smoke the cigar "plain"). Lick the outside leaf first. This will allow the leaf to be moist and less brittle. Unwrap the outer leaf, be careful not to crack or break the "outer leaf". Put this leaf aside. Now, take the cigar in your hand. We must find the seam of the "inner leaf"(if it exists). We must now "crack the blunt". This is done by "cracking the seam" with your two thumbs together (this inner wrap should be dry for the cracking procedure) Squeeze the blunt and spread the seam with your thumbs, this will split the "inner wrap" down the middle (lengthwise) along the seam. Discard the chopped tobacco insides. (if your driving, dump the insides on the ground. If your at home, use a cup or bowl and then into a trash bag). Now, weed must be pre-broken up, and de-seeded, without a stick or stem (unless you don't care) Now, moisten (lick) this "inner leaf" . Now we have a a moistened outer leaf and a moistened, split, inner leaf. Take the inner leaf and roll the weed it, like a normal joint. Now, Take the moistened outer leaf (this is hard to explain) and start to roll starting at the corner of the the outer leaf. This will result in a "spiral wrap" and not a "straight wrap". Now, moisten, light and enjoy.

I prefer Vanilla Dutchies...