This probably should be in the Combined Crack Pipe Thread, but I am not too sure. Benga may merge if this is case.
SWIM was browsing and came across this
http://aerosinfo.com/method.cfm and
http://www.dailymail.co.uk/news/arti...l-indoors.html
SWIM would like to know if this could be used to successful vapourise a crack rock without having to use an open flame. SWIM friends gave a live demonstration and this should answer most of the questions I have seen.
SWIMs friend had an glass stem (a long, thin glass rod with two open ends), one end was stuffed with a Brillo (chore boy) then the rock stuffed in afterwards. The open flame from a light was held in front and then a draw was made on the other open end. The flame is at right angles with the glass rod where the crack rock and brillo are stuffed in. The pull from the open end, causes the flame to be 'sucked in' through the stuffed end. As the heat passes over the stuffing, the crack rock vaporises when it catches on the brillo and the vapours go down the tube. Yes the open flame does touch the rock directly but not in a destructive way.
AFter time the glass rod will be blackened and broken at the 'flame end'.
SWIM has been racking his brain trying to invent something cleaner and neater. The above links should give you some idea. The idea would be to use a heating element, almost the same as those used in a car cigarrette lighter. SWIM did a research online and found that this heating element can and is sold separately. SWIM is not an inventor and SWIM's brain is not at the level SWIM wants it to be at so he is having trouble finishing the project.
SWIM would like to know if this
http://www.dailymail.co.uk/news/arti...l-indoors.html could be taken and modified to use with a crack rock? If so, how?
Thanks in advance for your feedback.
Disclaimer: CHarm always reads the forum posting rules and ensures they are not broken, if they are broken please inform Charm and the post will be edited and/or deleted and reposted in accordance with the rules within 24hrs.
Charm
Charm added 5 Minutes and 23 Seconds later...
Just to add to this thread, for the above to work (my orginal posting above), SWIM is confident that SWIY's may be the technically inclined or have the inventive mind to make this happen. Please PM me if you have to so that the forum rules are not broken. SWIM thought about asking the original manufacturers to make the modification, but its unlikely they will do so.
Thanks.
Charm