Drugs-Forum  
Home Wiki Studies Forum Groups Blog Video Images News
Go Back   Drugs Forum > RECOVERY & ADDICTION > Drug Addiction & Recovery > Cocaine addiction
Mark Forums Read
Register Tags

Notices

Cocaine addiction Support for coping with Crack & Cocaine addiction and Crack & Cocaine addiction treatment.

 
Thread Tools
  #1  
Old 23-01-2012, 09:28
nosdareth nosdareth is offline
Newbie
 
Join Date: 22-01-2012
25 y/o Male from United States
Posts: 12
nosdareth is an unknown quantity at this point
Points: 34, Level: 1 Points: 34, Level: 1 Points: 34, Level: 1
Activity: 0.6% Activity: 0.6% Activity: 0.6%
crack to cocaine,baking soda ratio

Firstly swim would ask that a mod closes his wondering what is cheaper post because swim has no connection right now he does not know pricing.

Swim has realized that the price and quality of crack and powder change randomly and frequently determining which is a cheap way to get crack is a bit pointless.

So swim would like to know how much powder and soda makes how much crack. Swim knows crack has more mass and density than powder so there for weighs more so the ratio is not 1:1. Will go with a small amount and go up, swim wants to know how much powder makes 1g 5gs 10gs of crack so he can work out the ratio unless someone already has tested this and knows it as fact. Swim thanks everyone for any assistance and information given
  #2  
Old 14-02-2012, 10:37
rejectedbysociety rejectedbysociety is offline
Account Awaiting Email Confirmation.
 
Join Date: 13-02-2012
Male from USA - Alaska
Posts: 99
rejectedbysociety is a decent psychonaut.rejectedbysociety is a decent psychonaut.
Points: 111, Level: 1 Points: 111, Level: 1 Points: 111, Level: 1
Activity: 0% Activity: 0% Activity: 0%
Re: crack to cocaine,baking soda ratio

you can't answer this question accurately. It depends on quality of the powder and how you cook it, my friend had a dream last night where he had some quality flake and he crushed the chunks up and put some in the pot with no soda, got it melted down all the way to the oils, sprinkled on just enough soda to bring it together, then hit it with the cold water and it came back 75%, but it was some straight bell ringer. He took the rest, to get it as close to 1:1 as possible, mixed in an equal weight of soda like he was cutting it like an A-Hole, dropped that into a small amount of hot water, let it foam up, then with a spoon dumped hot water on top of the foam until it was melted down, leaving most of the soda at the bottom of the pot, then sprinkled soda on top of the melted down substance til it came together properly, then dropped in enough ice to quickly make the water cold, and stirred it to cool things down quicker. He said the hotter you melt it down after it foams the better the quality, lower the weight, as when it foams up is where they can add the weight, he said he's seen crack that crumbled apart in the bag because they just let it foam up and cooled it down, trying to cut it so much. He also said if you get it too hot you'll boil it off.

Now, that was with high quality shit, if you go buy a 20 or 50 from an addict and cook it the first way you'll be lucky to get a quarter of the weight back, most dealers only get about 75% of that quality, and most addicts with enough for some weight pull out the good part for themselves and sell 2/3rds cut. If you aren't well connected it's not even worth buying

rejectedbysociety added 4 Minutes and 6 Seconds later...

please note the 2nd way was an example of what not to do, I wasn't trying to explain how to blow work up, just what happens if you don't use enough water, as explained by a friend who would know, he said dropping the quality work straight into hot water is the best way

Post Quality Evaluations:
good answer , makes sense

Last edited by rejectedbysociety; 14-02-2012 at 10:37. Reason: Automerged Doublepost
  #3  
Old 14-02-2012, 13:56
Hockeydemon Hockeydemon is offline
Titanium Member
 
Join Date: 30-04-2011
Male from United States
Posts: 132
Hockeydemon is on the way upHockeydemon is on the way upHockeydemon is on the way upHockeydemon is on the way up
Points: 403, Level: 3 Points: 403, Level: 3 Points: 403, Level: 3
Activity: 4.2% Activity: 4.2% Activity: 4.2%
Re: crack to cocaine,baking soda ratio

4:1 is the correct stoichiometric amount of sodium bicarbonate to use to effect a freebasing reaction on cocaine hydrochloride, 7g/per oz of coke.

This is however assuming you have pure cocaine.. Which you undoubtedly don't. Either way you should use this conversion for maximum effect.

Share this on:

Tags
cocain, cocaine, coke, cooking crack, crack, crack cocaine, crack to cocaine, drugs-forum, how to cook, sodium bicarbonate, stoichiometry

Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
TEK - Making crack cocaine with sodium bicarbonate (baking soda) methods Woodman Cocaine & Crack 255 01-07-2014 03:11
Drug info - Crack: Decay in the Inner Cities of beentheredonethatagain Cocaine & Crack 1 26-02-2010 16:19
TEK - Baking Soda crack rmoon0123 Cocaine & Crack 8 21-10-2007 05:46

» New Threads
I took 1500mg of phenibut-nothing...
Last post by profesor
9 Replies, 151 Views
Florida Pain Pill Refill...
Last post by boredswfl
0 Replies, 1 Views
Lets say it takes an hour for tea...
Last post by ianzombie
9 Replies, 140 Views
Homemade enema and cleaning the...
Last post by Name goes here
3 Replies, 114 Views
Serequel vs trazodone vs ambien -...
Last post by Staggered slash pipes
1 Replies, 50 Views
Drug test
Last post by TheBigBadWolf
2 Replies, 42 Views
Struggling to kick heroin addiction
Last post by la-di-da
6 Replies, 119 Views
WHO hepatitis report
Last post by TheBigBadWolf
0 Replies, 1 Views
Your most euphoric combination
Last post by la-di-da
629 Replies, 128,777 Views
Opiates and Benzos.. The Battle of...
Last post by la-di-da
1 Replies, 90 Views
» New Wiki Articles
GHB
NET

Sitelinks: Information:

All times are GMT +1. The time now is 13:22.


Copyright: SIN Foundation 2003 - 2014, All rights reserved