Dear Drugs-Forum readers: We are a small non-profit that runs one of the most read drug information & addiction help websites in the world. We serve over 2.9 million readers per month, and have costs like all popular websites: servers, hosting, licenses and software. To protect our independence we do not run ads. We take no government funds. We run on donations which average $25. If everyone reading this would donate $5 then this fund raiser would be done in an hour. If Drugs-Forum is useful to you, take one minute to keep it online another year by donating whatever you can today. We just need 1% of our readers to donate. Donations are currently not sufficient to pay our bills and keep the site up. Your help is most welcome. Thank you.
I see that people have only posted iso extraction methods here.
Well my friend has a super easy method that will work 100% of the time, and is super easy.
You just have to wait 12-24 hours to get it to work.
Well just take a shot glass and fill it with a minimum of 5cc (5mls) of sterile water. Put it in microwave on low settting and bring to a boil. Stop the microvave as soon as it begins to boil to avoid the water exploding!!
Then run it again in the mic for a few seconds. Right away drop a whole pill in there. Let it sit for a minimum of 10 hours. You can do another wash later.. It will continue to just blow up (the pill) just add more water (cold is fine) and take the pill out , then use some cotton and filter.
Make sure to always add eneough water for the pill to soak up, then the extra needed to fill your rig!
there is a quicker way to get some ready, and I do it all the time.
Take as many as 3 pills and add it to about 9-10 ccs of hot water . after about 7-8 hours you will have a nice shot ready, and then you can just add a little more water to it after you filter out what you took.
When you can keep taking the pills out and sterily take them out and place them in a sterile place while you filter out your shot, then place them back in the shot glass.
You can easily keep this going for a full 24 hours. It just takes about 6-7 hours at a time after the initial 7-8 to make up another shot.
There it is. simple as pie!!! If you ave any questions just ask..
My friend uses either 30s or 40's when doing this and he told me that the lower strength pills seem to blow up quicker and suck up water a little faster.
Also no need to take the coating off, just filter real well!
This way you will not get anything in your shot besides water and oxymorphone.
It is also best to use a wheel filter if you can get one!
Have you tried adding an equal volume of cold acetone to the solution? I would expect the oxymorphone to crash out. Dry (until no acetone smell) and dissolve in 0.5-1ml water. Less to inject - not that injecting pills is ever a good idea.
The only thing that comes to mind when i read this post is what pill shootin junkie is gonna wait that long to do a shot. Most addicts live there life moment to moment and dont usually have 24 hours to sit around and wait to shoot up.... It definitely does seem easier to do as far as the process you have to go through but Im betting just about everyone will take the shorter route rather than the easier route. Good post though
Yeah I know that most people would not be able to wait the 24 hours for every bit of the oxymorphone to be released.
That is why my friend told me that you can speed it up by putting 2 or 3 tabs in the water at a time, but just add more water to it.
He told me that 3 tabs take about 8 ccs of hot water to start, and by hour 7-8 the first dose is ready. Ten after you take out a 3 cc shot just add another 3 ccs to the shotglass again.
this is using a 3cc syringe though. What I also was told was make up 3-4 shot glasses all with 5 mls of hot water, then add 1 tab to eahc one, this way you will always have one ready to go.
You would just have to wait on that first one though.
Well take care!
This worked perfect with a 40mg Opana new style (E-?) ER pills.
Here's how I did it:
-I licked the coating off with the good ol' tongue and t-shirt method.
-Flattened the pill with a pair of pliers with the pill inside of a straw.
-Cut the flat pill into strips.
-Placed the pill strips evenly on a spoon (no overlap).
-Heated the spoon with a small pocket torch until it brown/blackened.
-Added 50ml of cold water to cool down.
-Added 250ml of water.
-Stirred the mixture with an old plunger.
-Added cotton. Roughly half a cue-tip balled up tight.
-Slowly drew up 75ml.
I got 3 good extremely strong shots out of this.
Be careful shooting Oxymorphone it's extremely powerful compared to eating or snorting them, similar to Dilaudid/Hydomorphone. I have an extremely high tolerance and 5-10mg puts my dick in the dirt, so start small and please don't mix with benzos!!