what went wrong with GHB?

[Equality]

Hmmz let me explain the situation,

I had :

250ml GBL
400ml water
120gram NaOh

I first mixed the NaOh and the water then i added the GBL, i noticed that the last bit of gbl i added did not react zo i added 2 grams of naOh, stirred this al together, let it boil for 25 minutes so that a lot of the water was gone.

I poured the mixture in a 0,5 L bottle and let it cool down..

Now i have a bottle filled with 1 great hard white chunk??

What is this? When i heat it up it dissolves but when it is cooled down(even a bit) it instantly becomes hard and white.

Can anybody help

[oscar19681]

When you get a big white chuck you did not add aditional heated water . you see , When you are done you have pure ghb ! Its not a very good idea to take it pure because dosing will be even harder than normal . What happens is that the ghb cools down into powder ghb . This happens when you dont add aditional water . I believe what you have now is pure ghb .
Swim makes it this way.

125 gbl .
160 ml dist water .
63 naoh .

When swim is done with Swim usually has about 120 ml pure ghb left and adds HEATED water to the pure ghb till it reaches 250 ml .

A solution to your problem? put the all the white stuff (the ghb)in a pan add water and cook it till you have 120 ml pure ghb left . Then apply the above. There you have 250 ml of good ghb!

You could also just take the white compound . Bear in mind that 1.5 to 2 grams is about 1 dose . I prefer to take the ghb liquid . But some prefer powder ghb since its easer to dose.

[uacvax]

You just contradicted yourself oscar.

Why 50% ghb?

[oscar19681]

why is that? And what do you mean with 50% ghb?

[Alfa]

What went wrong:

1. You did not read the rules.
2. You posted in the wrong section.
3. You wrote a confession to an illegal act on an open internet forum and are now liable to prosecution.

[Equality]

Very helpfull..

[Alfa]

Well, I was hoping you would act on my comments. Both in this topic and the other one.

Might be wise...

[uacvax]

sorry oscar I'm tripping.

I think I meant to ask why liquid GHB is usually 50%. And why are all the dosings in grams when liquid is the most common form. Can't we just set 50% ghb as a standard and proceed from there in grams. Granted not anyone is going to have the same exact dose but It'd be a lot more convenient if a little less safe..

[godismdma]

Originally Posted by uacvax

sorry oscar I'm tripping.

I think I meant to ask why liquid GHB is usually 50%. And why are all the dosings in grams when liquid is the most common form. Can't we just set 50% ghb as a standard and proceed from there in grams. Granted not anyone is going to have the same exact dose but It'd be a lot more convenient if a little less safe..

.
The less safe part is really bad especially since the end. product may have to much naoh-sodium hydroxide-==lye==uhhhh which could KILL and if not the impurities in either 1 or both chems! Meaning u don't know how much is reacting in ur liquid sol. N how diluted it would which could cause a new noise 4 da Dea n fda which already claim hate even though orphan medical has patent on da market very controled!!!