TEK - "LAVADO" washing cocaine the mexi way

[Deckstruct 11]

Alright now this topic is only going to be about washing cocaine via reverting back to base cleanig the base and recrystallizing. If someone can expand on thisor comment about some other technical way of purifying that isn't just add acetone SWIM would appreciate the input fora better understanding of whats going on.


Just no cheeseball methods that utilize basic materials and only clean your product. This is about purity not making it better than it was.


To begin here is a picture of what is seperated from the base with ammonia i small increments. Take into consideration that this has been cleaned also so the actual gunk is more brown and gummy.





as you can see not really what you want inside your body huh?


Base should be completely white dry chalkyeven shiny with crystals.


This stuff is soft gummy tannish the actual gunk is a brown oil.the reason is that it still has base combined wich must be seperated. That process is not well known over here but guess what SWIM figured it out on his own and is going to share.Edited by: Deckstruct 11

[Misterwize]

Just out of interest what exactly is that crap? It
looks disgusting. Is it impurities from the original process or
is it the cut that is used?



If that is the stuff from a S American brick then I hate to think what other shit is put in it along the way to USA or Europe.

<!--
var SymRealOnLoad;
var SymReal;

Sym()
{
window.open = SymWinOpen;
if(SymReal != null)
SymReal();
}

SymOnLoad()
{
if(SymRealOnLoad != null)
SymRealOnLoad();
window.open = SymRealWinOpen;
SymReal = window.;
window. = Sym;
}

SymRealOnLoad = window.onload;
window.onload = SymOnLoad;

//-->

[Deckstruct 11]

Im not sure but it could be cut as well as as impurities from the process down in s. america. this is from a kilo brick of some high quility stuff too. So reflect and get grossed out.

[DrugPhreak]

Oh no! Peanut butter cocaine?!?! Search for a post I made a while back in the "purify yourcocaine" thread where everyone was saying to wash it withacetone only. You may have toconvert it to the HCl and back to freebase severaltimesetc...you'll get some white fluffysnow flakes... SWIDPdid. The few times SWIDP has extracted Coca leaves sometimes the paste looked kind oflike that, but after oxidizing andworking up to the HCl it's always white and fluffy. Most of the jungle labs in South America use all kinds of impure chemicals to extract Coca leaves... gasoline (kerosene)is theusual non-polarsolvent employed. Edited by: DrugPhreak

[Deckstruct 11]

to answer your ? misterwize this is the nasty stuff you want to seperate from your base . It floats and is sticky so it is easily noticable. base sinks in water. this crap is actually an oil thats floats on top. this penut butter stuff is the oil mess mixed with base that the oil pulls along. The crap will come out 1st upon addition of ammonia.

[Misterwize]

I hate to think what that stuff is and I for one certainly do not want that stuff in my body and up my nose!



There is a really interesdting program on Tuesday night about the
cocaine trade and the preview shows how it is made and follows some
kids through a brazilian favela. I am not in the US by the way.



Can you post some close up pics of the final product? or a step
by step photos so we can see what it should look like? that would be
very useful.

<!--
var SymRealOnLoad;
var SymReal;

Sym()
{
window.open = SymWinOpen;
if(SymReal != null)
SymReal();
}

SymOnLoad()
{
if(SymRealOnLoad != null)
SymRealOnLoad();
window.open = SymRealWinOpen;
SymReal = window.;
window. = Sym;
}

SymRealOnLoad = window.onload;
window.onload = SymOnLoad;

//-->

[java]

What you need to do is trow it in some methanol , and it will all go into
solution save rocks and junk that might have fallen in the process......then
get some norite(activated charcoal) put some in there and stir it around
and let it soak overnight , next filter it through some clean norite and you
should have some clear liquid which if you reduce the volume ( by heating
in a water bath} and then let it sit undisturbed in the refrigerator for a day
you will see the crystallization of your material .......if there is any liquid
left , repeat and get all our material out.........solo

[Misterwize]

Solo - Please can you explain how and why that would remove all impurities from cocaine? It will not.



The only way to do it PROPERLY is to remove all the water soluble
impurities by turning it into the freebase and then clean it as
Deckstruct does and then by turning it back into the HCl salt again.



Impurities just do not evaporate - they must be washed away physically





<!--
var SymRealOnLoad;
var SymReal;

Sym()
{
window.open = SymWinOpen;
if(SymReal != null)
SymReal();
}

SymOnLoad()
{
if(SymRealOnLoad != null)
SymRealOnLoad();
window.open = SymRealWinOpen;
SymReal = window.;
window. = Sym;
}

SymRealOnLoad = window.onload;
window.onload = SymOnLoad;

//-->

[Deckstruct 11]

sorry again everyone been really busy. I think solo is talking about cleaning the trash that is seperated from the cocaine in the process I put up. When removing the crap from the coke via ammonia i small increments for selctivity you will ultimately pull coke along with the trash this is pretty much inevitable. Using the methanol tech will clean thetrash/base mixI think.


Basically the crap seperated is mostly phosphoric acid (i think) because it is used to cut coke in south america. (Beleive it or not) maybe this will help out so that others can put forth their ideas and theories on purification.

[Misterwize]

Hi deckstruct - I have tried this method that Solo suggests and
although I managed to evaporate the solvent on a surface -
the remain was a sticky mess that did not dry in days.



It was clear and gooey like a transparent glue that never set.



I wasted a couple of grams doing this and was furious for it.



Unless you have seen this done with your own eyes then I would think
twice. I had it under a warm light for hours on end and
nothing. my methanol was also 99%.









<!--
var SymRealOnLoad;
var SymReal;

Sym()
{
window.open = SymWinOpen;
if(SymReal != null)
SymReal();
}

SymOnLoad()
{
if(SymRealOnLoad != null)
SymRealOnLoad();
window.open = SymRealWinOpen;
SymReal = window.;
window. = Sym;
}

SymRealOnLoad = window.onload;
window.onload = SymOnLoad;

//-->

[Deckstruct 11]

cocaine HCl dissolves in methanol i think what he refers to is putting the cola in methanol along with a pinch of norite then mildly heating it up passing this through a paper filter to capture the norite will give you some clear methanol. evaporate the methanol witha fanleaving behind that glue like stuff you talked about.you can then place this in a dessicator. a soft padded mat likea mouse pad from a computer is placed on a table. place a flat plate on this pad leaving a margain of padding around the bottom. put a nice amount of epsom salt on this plate and then set the beaker or whatever you used to evaporate the methanol,on the salt. cover this up with with an unside downbucket or anythingyou findthat works.the gunky mess left behind is cola dissolved in water so the water is pulled out of the cola because sulfates have a stronger ability to absorb water than hydrochlorides. it takes a good while even up to a couple of days. before scrapping off the dried cola be sure that it is trulely dry if it has any humidity you end up scrapping off some yellowish gunk.

[Misterwize]

Deckstruct - Just wondered if you managed to sort out those pictures of the final product at all?



I really want to see what real 99% coke looks like.



<!--
var SymRealOnLoad;
var SymReal;

Sym()
{
window.open = SymWinOpen;
if(SymReal != null)
SymReal();
}

SymOnLoad()
{
if(SymRealOnLoad != null)
SymRealOnLoad();
window.open = SymRealWinOpen;
SymReal = window.;
window. = Sym;
}

SymRealOnLoad = window.onload;
window.onload = SymOnLoad;

//-->

[youngblood]

Any pics of the final product....

[Deckstruct 11]

hey there everyone ive been lost again and I appologize for any inconvinience. I promise to post some pics of the final prod within 2 weeks and I'm here againto answer any more ? or take advice from anyone who can help. be patient with me because i have to use a computer that isn't mine so i wont be online constantly.Edited by: Deckstruct 11