measuring method: safe graph paper method

[BEEKSc1]

i know this isn't the most accurate way of measuring RC's, but there is particular safe way to measure out RC's if swim doesn't have the money or a scale to use.


materials needed:


graph paper


pleaxy glass


razor blade


a card from a deck of cards


gels cap (availibleat gnc)


foil


masking tape


with the masking tape, block in a ten by ten (100 squares) square and then tapethe graph paperface up on the pleaxy glass. pour the desired chem on the glass and cut it evenly throughout the 10x10 square. get it as close to even as possible and then use the foil to smooth it out more. then get the chem back in the 10X10 square. repeat untill desired. once you have it to where you think it about even, start cutting the chem up, one block at a time. pull the chem off the pleaxy glass with the razor onto a bent card. once the chem is on the playing card, pour it into the gelcap, multiply by a hundred.


swim's friend and him did it with 2c-i and 5-meo-dmt and had no problem.they labeled the cap either small, medium, or large, being 5mg-10mg, 7.5mg-12.5mg, 10mg-15mg respectively because the edge blocks tended to be the smalls and the middle blocks tended to be the larges. it took about three hours per 1000mg per chemical with thining the chem out taking about a half hour, but it's all doesd out realitively safe.Edited by: BEEKSc1