Simple Hash-oil extraction

[sunyata]

I'll describe a very simple procedure for making very high-quality hash-oil.


You need:


-Weed


-Butane lighter gas refil


-0,5 ltr plastic bottle


-glassbowl


First, make a hole in the plastic bottle which fits with the valve of the Butane container, it has to be relatively tight. Fill the bottle with weed, anything from just a couple of grams to a whole lot more, and screw the cork on the bottle, tightly. Fill the bottle with the butane, until the liquid covers the weed. Separate the butane container from the hole in the side of the plastic bottle, and place your thumb over the hole, rapidly, so that as little gas as possible is lost. Shake it a couple of times, and release the gas into the glassbowl. Most of the gas will still be liquid in the glassbowl, so you have to wait until all is evaporated before you hav access to the good stuff(make sure all is evaporated, butane is not a good thing to get high on). You now have hash-oil in the bottom of your bowl, which can be easily scraped out with a suitable knife or spoon. The colour of the oil will generally be brighter the better weed you use, oil I made from Ice buds was platinum coloured, oil from standard danish pot was green.


You should do this outdoors or in a very ventilated environment, far away from any fire.


After collecting the oil it would be wise to wait 24 hours before smoking, so that you're sure all the gas has evaporated.


Really potent skunk, like Ice or white widow, yields a very strong oil that should be used with care, it's not for children, and lasts a lot longer, 6-8 hours at least.


Just say know