Snorting - acetone wash on k

[kshwacked]

ok so swims friend tried this and he said it soposidly worked so swim went there and did a big line burnt like sooo bad asked him how he washed it turned out it was with regular hardware store acetone now should i be worried or is the burn the worst of it

[lonesomeheroes]

The acetone might not be pure. You could ask the hardware store if they can give you the Material safety data sheet of their product. Or at least evaporate some acetone to see if it leaves residue.

[Coconut]

Did SWIY let all of the acetone evaporate first before insufflating? It could take a while.

[Agent Subby]

Huhh, why would swiy wash K up with acetone?

[Sizzup]

because street ket like coke and be adulterated with anything from baking soda to ajax floor cleaner. acetone can clean the k powder and pick up caffiene and other gunk then all swiy has to do is evaporate the solution acetone and gunk is gone and the good stuff is left

[Ontherooftops]

Well, it very well could be adulterated acetone. Be aware that what swiy needs to use for nearly all of these processes in order to remove cuts as effectively as possible, or at all in some cases, is ANHYDROUS acetone, which can be made easily, lejunk explains how nicely.